64-zone technical alarm

The technical alarm panel is used in all types of building (boiler rooms, lifts, plant rooms, etc.) to signal technical faults in installations. The input information is a potential-free normally open (NO) or normally closed (NC) contact. The input contact type is configured using a dip switch on the back of the front panel. Each input can be configured individually. 

As an option, one relay output per zone providing a potential-free NO and NC contact for high-current control. All panels have a potential-free changeover contact and a synthesis output powered in the event of a fault. 

Commissioning

1. Configure the type of input contact (NO or NC) using the dip switch on the back of the front panel. 
2. Attach the panel and switch it on. Wait 24 hours to ensure the battery is fully charged. 

How it works 

1. When an input faults, an audible signal sounds and the corresponding LED flashes. 
2. Press the "Stop beeper" button to acknowledge the beeper and the LED will change to steady light. 
3. When the fault disappears, it can be cleared by pressing "Reset".