Flash and audible alarm - PPMS Radio with Repeater

The audible warning light flash radio repeater offers 3 possibilities depending on its configuration (audible, audible light flash or luminous flash only). It can be integrated into PPMS radio warning systems and combined with a group made up of radio elements from the AXENDIS range.

It is used to warn occupants of a building of the presence of a risk of attack. It broadcasts the attack alert sound as well as the light alert. It is particularly suitable for noisy premises or premises occupied by people who are deaf or hard of hearing.

Audible alarms must be audible from all points in the building where they are installed. 

The flashing beeper radio repeater can be integrated into an existing radio group. Its radio protocol eliminates the constraints of a conventional master/slave system and allows an almost unlimited number of devices to be added to a group (up to a maximum of 10 signal bounces between the source and the last receiver).

• Environment : Type A (indoor)
• Wall-mounted device
• Power supply: 2 x 6LR61 9-volt batteries
• Radio autonomy: 4 years with at least 5 minutes of alarm
• Maximum number per group: Unlimited in radio coverage area
• Maximum number of bounces: 10
• Maximum distance between each member: 100m free field/30m obstructed field
• Operating temperature: -10°C to + 50°C
• White flash: frequency 1 Hz
• Protection rating: IP 40 / IK 07
• Weight: 570g
• Dimensions: 130x140x80 mm(WxHxD)