Smoke ventilation control unit for residential buildings

System designed for collective housing covered by the decree of January 31, 1986 (housing and hostels not exceeding 50m² floor area of the top floor and their covered parking lots if they exceed 100m²).

• Manages up to 2 zones of 20 floors each;
• 72W de puissance disponible pour les deux cantons + 12W pour les reports ;
• Option to configure connected floors;
• Modbus RTU output for supervision connection;
• Automatic smoke extraction of one floor at a time to prevent smoke spread through ventilation ducts;
• Option to connect manual fire triggers and sound diffusers for use in hostels (Article 69 of the decree of 31/01/1986);
• Arkeon app for diagnostic and installation assistance.

Installers

• Simple and cable-efficient system architecture
• Compact materials and easy to install (no drilling of junction boxes, screws on external fixings to modules);
• Auto-detection and auto-configuration of the central unit, simple option configuration 
• Wiring instructions directly on the equipment;
• Detailed wiring status and potential errors, faults, or alarms via indicators near each terminal block;
• Visible indicators without opening the modules;
• Module resistance to short circuits, wiring errors, and polarity reversals;
• Option to set a floor to test or out-of-service mode from its module;
• Fault and alarm history, detailed status of each module, and power bus current measurements via the Arkeon mobile app;
• No specific modules required for connecting shutters or at the end of the line (end-of-line element only);
• Module operation at 24V or 48V;
• Bus and module protection via self-resetting electronic fuses (one physical fuse at the power input only);
• Monitoring of all lines (DM, detectors, position sensors, smoke extraction vents, etc.);
• Periodic integrity check of firmware and site data.

Maintenance Staff

• History of defects and alarms (1024 events), detailed status of each module and current measurements on power buses via the Arkeon mobile app;
• Detailed status of wiring and any errors, defects or alarms via indicator lights near each terminal;
• Visible indicators without opening the modules;
• Option to set a floor to test or out-of-service mode from its module;
• Bus and module protection via self-resetting electronic fuses (one physical fuse at the power input only);
• Monitoring of all lines (DM, detectors, position sensors, smoke extraction vents, etc.);
• Periodic integrity check of firmware and site data.

Users and security services

• Simplified facade with immediate display of key information;
• Fault and alarm history, detailed status of each module, and power bus current measurements via the Arkeon mobile app;
• Monitoring of all lines (DM, detectors, position sensors, smoke extraction vents, etc.);
• Periodic integrity check of firmware and site data.