Mondial Extincteur helps you choose your emergency lighting. Let us guide you...
Did you know that the regulations impose very specific requirements on the choice and positioning of your safety lighting?
Whether you receive the public or employees, safety is very important. In this article we will advise you on your safety lighting.
Safety lighting is used to indicate an emergency exit, a staircase or a potential hazard in the event of a power cut. It makes it easy to evacuate your premises in an emergency.
We can distinguish two main types of safety lighting :
-
Escape route lighting: BAES (Blocs Autonomes d'Éclairage de Secours, i.e. self-contained emergency lighting units).
-
Ambience lighting: BAEH (Blocs Autonomes d'Éclairage pour Habitation, i.e. self-contained lighting units for dwellings).
The BAES: installed in all establishments receiving employees or the public, and in certain buildings, the role of the BAES is to facilitate evacuation in the event of a problem such as a fire starting, an outbreak of fire or a power cut.
-
Emergency lighting units are spaced 15 metres apart.
-
A unit must be positioned at each obstacle.
-
A unit must be positioned at each change of level.
-
A unit must be positioned at every exit of a room.
-
A unit must be positioned at each change of direction.
The BAEH : installed in areas for a minimum of 100 people on upper floors, or a minimum of 50 people on basement levels, its role is to maintain diffuse lighting and to prevent panic.
-
BAEH units are spaced at less than 4 times their height above the floor. For example, for a BAEH located at a height of 2 metres: 4X2 = 8. BAEH units located at a height of 2 metres will be spaced a maximum of 8 metres apart.
-
A minimum of 2 BAEH per room.
BAES or BAEH units must remain on standby when they are supplied normally. Their role becomes essential in the event of a power cut. The BAES will then light up and run on battery for 1 hour, while the BAEH will stay lit for 5 hours.
Which safety lighting suits my premises?
www.mondialextincteur.fr is the specialist in your safety.
You can consult the method for positioning your safety lighting by clicking below:
https://www.mondialextincteur.fr/documents/CHOIX%20ECLAIRAGE%20DE%20SECURITE.pdf
How can I find out the condition of my BAES or BAEH fleet?
The head of the establishment is responsible for safety. In this respect, they must make sure that their BAES or BAEH units are in perfect working order. "SATI" technology (Système Automatique de Test Intégré, i.e. integrated automatic test system) makes the units intelligent and they test themselves.
Non-"SATI" BAES or BAEH units must be checked periodically by human means. Maintenance companies can check and service your BAES or BAEH units. This option is widespread, and these companies will be effective if a fault is found.
You can follow this link to choose your safety lighting: https://www.mondialextincteur.fr/Eclairage-securite-BAES/