Proportioner Mixer 200 l/min 1 x DSP 40

Prime-melt aluminum alloy construction, with high-strength heat treatment, protected against corrosion by an epoxy coating and 50 µ hard anodizing

• Inlet: DSP fitting DN 40
• Outlet: DSP fitting DN 40
• Material: Aluminum alloy / Polyester paint coating
• Nominal pressure: 16 bar
• Test pressure: 25.5 bar 
• Dimensions 415 X 169 X 185
• Weight: 2.93 kg
• Standard: NF EN 377

Operation.

The proportioner (ref. A) is placed between the pump (ref. B) and the foam-generating device (ref. C). Adjust the pressure to obtain the desired flow and pressure at the proportioner inlet. Depending on the length of hose at the proportioner outlet, pressure losses vary, as does the suction capacity of the proportioner. The suction tube must be immersed in a foam concentrate container (ref. D) to create foam at the outlet of the foam-generating device